Industrial Bldg.
01-04
68-564-01
REV. A
RGB 500 A
RCHITECTURAL
S
ERIES
I
NTERFACES WITH
A
UDIO
& ADSP
™
300 MHz (-3dB) video
bandwidth
Wall-mountable
ADSP
™
– Advanced
Digital Sync Processing
15 kHz to 130 kHz
compatibility
Active audio interfacing
Architectural Adapter Plates
(RGB 508, RGB 568)
Level/peaking control
Horizontal centering
RGsB, RGBS, or
RGBHV output
75 ohm termination switch
(RGB 500, RGB 508)
ID bit termination switch
(RGB 560, RGB 568)
Grey, black, or white
faceplates
12-24 VAC or VDC
Female 15-pin HD input
(RGB 560, RGB 568)
Buffered local
monitor output
(RGB 560, RGB 568)
Dual interfacing models
(RGB 500, RGB 560)
Video
Gain .................................... Unity (0.70V p-p), (0.725V p-p)
50% peaking, (0.75V p-p) 100%
peaking
Bandwidth .......................... 300 MHz (-3dB)
Video input
Number/signal type.............. 1 analog RGBHV, RGBS, RGsB,
RsGsBs
Connectors
RGB 500, RGB 500 Dual,
RGB 508, ........................ 1 9-pin D male, MBC/LBC cable
or buffer
RGB 560, RGB 560 Dual,
RGB 568, ........................ 1 15-pin HD female
Minimum/maximum levels .. Analog—0.3V to 1.5V p-p with
no offset
Impedance............................ 75 ohms or High Z, switchable
(set to 75 ohms if no local
monitor is connected)
Horizontal frequency............ Autoscan 15 kHz to 130 kHz
Vertical frequency ................ Autoscan 30 Hz to 120 Hz
Return loss .......................... -30dB @ 5 MHz
Maximum DC offset ............ 4.0V
Video output
Number/signal type.............. 1 analog RGBHV, RGBS, RGsB
Connectors
All models ........................ 5 BNC female
RGB 560, RGB 560 Dual,
RGB 568, ........................ 1 15-pin HD female for buffered
local monitor output
Minimum/maximum levels .. 0.70V to 0.75V p-p with no offset
and 0.7V p-p input
Impedance .......................... 75 ohms
Return loss .......................... -30dB @ 5 MHz
Sync
Input type .......................... RGBHV TTL (±), RGBS TTL (-),
RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type ........................ RGBHV (±), RGBS(-), RGsB (-)
Input level .......................... 2V to 5.5V p-p with ±0.3VDC
offset (max.)
Output level ........................ 4V to 5V p-p
Input impedance ................ 10 kohms
Output impedance .............. 75 ohms
Max. input voltage .............. 5.7V p-p
Max. propagation delay ........ 48 nS
Max. rise/fall time ................ 3.5 nS
Polarity
All models.......................... RGBHV: Polarity follows input
when RGBHV is input and the
bottom panel sync polarity jumper
is set to follow (pin 1 jumpered to
pin 2). Sync polarity is negative if
the sync polarity jumper is set to
negative (pin 2 jumpered to pin 3).
RGBS, RGsB: Negative
Audio
Gain .................................... Unbalanced 0dB, balanced +6dB
Frequency response .............. 20 Hz to 20 kHz, ±0.05dB
THD + Noise ...................... 0.03% @1 kHz, 0.3% @ 20 kHz
at rated maximum output drive
S/N ...................................... >90dB at rated maximum output
(14dBm), balanced
Stereo channel separation .... >95dB @ 1 kHz to 20 kHz
Audio input
Number/signal type.............. 1 PC level stereo, unbalanced
Connectors .......................... 1 3.5 mm stereo jack, 2 channel;
tip (L), ring (R), sleeve (ground)
Impedance ..........................10 kohms, DC coupled
Maximum level .................... +8.5dBu, (unbalanced) at stated
%THD+N
Audio output
Number/signal type.............. 1 stereo (2 channel), balanced/
unbalanced
Connectors .......................... 1 3.5 mm stereo captive screw
connector, 5 pole, for left and right
output
Impedance .......................... 50 ohms unbalanced, 100 ohms
balanced
Gain error ............................ ±0.1dB channel to channel
Maximum level (600 ohm) .. > +14dBm, balanced at stated
%THD+N
General
Power .................................... 12 to 24VAC or VDC, 0.35 A,
5 watts, external (Order the power
supply separately, part #70-055-01.)
Rack mount.......................... No
Furniture mount .................. Yes, or wall mount, with included
hardware
Enclosure type .................... Metal
Enclosure dimensions —
RGB 500, RGB 560
Faceplate .............................. 4.5" H x 4.6" W (11.4 cm H x
11.7 cm W)
Interface enclosure ................ 2.5" H x 3.7" W x 1.75" D
(6.4 cm H x 9.4 cm W x 4.5 cm D)
(Depth excludes connectors
and knobs.)
Enclosure dimensions —
RGB 500/560 Dual, RGB 508/568
Faceplate .............................. 4.5" H x 8.2" W (11.4 cm H x
20.8 cm W)
Interface enclosure................ 2.5" H x 3.7" W x 1.75" D (6.4
cm H x 9.4 cm W x 4.5 cm D)
(Depth excludes connectors and
knobs.)
Shipping weight .................. RGB 500, RGB 560 2 lbs (0.9 kg)
All other models 3 lbs (1.4 kg)
Approvals.............................. UL, CE, FCC Class A
Warranty .............................. 2 years parts and labor
H. SHIFT
H. SHIFT
Comentários a estes Manuais