Extron-electronics GSS 100 User Guide Manual do Utilizador Página 23

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 60
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 22
Programming
Guide
This section describes Simple Instruction Set operation of the GSS 100.
The rear panel RS-232 connector (see figure 16) can be connected to the serial port of a
host device, such as a computer or control system. Communications with the GSS are via the
Extron Simple Instruction Set (SIS).
5
1
9
6
RS-232FunctionPin
1
2
3
4
5
6
7
8
9
Tx
Rx
Gnd
Not used
Transmit data
Receive data
Not used
Signal ground
Not used
Not used
Not used
Not used
RS-232
Figure 16. Remote Connector Pinout
The baud rate for the rear panel RS-232 port can be set to a variety of different rates. The
default protocol for the port is as follows:
9600 baud no parity
8-bit, 1 stop bit no ow control
GSS 100 Graphic Still Store • Programming Guide 17
Vista de página 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Comentários a estes Manuais

Sem comentários