Extron-electronics SW DVI A Series User Guide Manual do Utilizador descarregar pdf (Página 19)

SW DVI A Series • Operation

Operation, cont’d

3-10

SW DVI A Series

9. On the Choose Firmware File window, double-click on

the new rmware le to open it. The Choose Firmware

File window closes, and the path to the selected rmware

le is displayed in the “Select a rmware le” eld on the

rmware le selection screen.

10. Click the Upload button. A status bar, which shows the

progress of the upload, appears in the Firmware Loader

window. The rmware upload to the switcher may take

several minutes. Once the status bar has progressed fully

from left to right, the rmware loader utility resets the

switcher.

In addition, messages appear on the rmware le selection

window indicating when the unit is uploading the

rmware, then resetting itself.

When the rmware upload process is completed, the

message “Transfer Complete!” is displayed, and the new

rmware version number appears in the Current Unit

Information eld.

11. Click Exit to close the Firmware Loader.

Chapter Four

SIS Conﬁguration and Control

Host-to-Switcher Communications

Using the Command/Response Table

Command/Response Table for SIS Commands

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Sem comentários

Extron-electronics SW DVI A Series User Guide Manual do Utilizador Página 19