Extron electronics P/2 DA2 Manual do Utilizador descarregar pdf (Página 2)

DESCRIPTION SPECIfICaTIONS

aPPlICaTION DIagRam

Speciﬁcations are subject to change without notice.

Local

Monitor

Extron

P/2 DA2 Plus

Distribution Amplifier

Projector

07-01

68-1357-01

REV. A

The Extron P/2 DA2 PLUS is a compact one input, two output,

VGA-QXGA distribution ampliﬁer. It is ideal for use in dual-display

presentation systems or anywhere that a single, high resolution

computer-video signal needs to be routed to two displays. The

P/2 DA2 PLUS distribution ampliﬁer is equally at home on the road

with presenters-on-the-go, or when installed in small, tight places.

The P/2 DA2 PLUS offers 300 MHz (-3 dB) RGB video bandwidth and

is compatible with VGA-QXGA resolution graphic cards, monitors,

and projectors. Sync impedance can be set for optimum performance

with laptop computers.

For the utmost in portability, the P/2 DA2 PLUS is housed in a

briefcase-friendly, compact enclosure. To ensure that all components

stay together, the P/2 DA2 PLUS features an attached, 5-foot (1.5 m)

male VGA cable, as well as an attached, external, international

power supply.

fEaTuRES

n Bandwidth – 300 MHz (-3dB) RGB video bandwidth maintains

signal integrity.

n Compatibility – Compatible with VGA-QXGA resolution graphic

cards, monitors, and projectors, as well as Macintosh

computers

with 15-pin HD outputs.

n ID bits – ID bits are routed through the local monitor output.

n Selectable sync impedance – Sync impedance can be set via

DIP-switch for optimum performance with laptop computers.

n Individually buffered outputs – Buffered outputs maintain the

original signal integrity and eliminate noise interference.

n External International Power supply – An external, attached,

autoswitching power supply provides worldwide power compatibility.

Video

Gain ............................................... Unity

Peaking ........................................... Fixed

Bandwidth ...................................... 300 MHz (-3 dB)

Video input

Number/signal type ........................ 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors ..................................... (1) 15-pin HD male cable (attached)

Nominal level .................................. 0.7 Vp-p for RGB

Minimum/maximum levels.............. Analog: 0.3 V to 1.5 Vp-p with no offset

at unity gain

Impedance ..................................... 75 ohms

Horizontal frequency ....................... 15 kHz to 135 kHz

Vertical frequency ............................ 30 Hz to 170 Hz

Return loss ..................................... <-38 dB @ 5 MHz

Video output

Number/signal type ........................ 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs

output

1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs

local monitor output/loop-through

(ID bits are passed through)

Connectors .................................... (2) 15-pin HD female

Nominal level .................................. 0.7 Vp-p for RGB

Minimum/maximum levels.............. 0.3 V to 1.5 Vp-p (follows input)

Impedance ..................................... 75 ohms

Return loss ..................................... -41 dB @ 5 MHz

DC offset ........................................ ±5 mV maximum with input at 0 offset

Sync

Input type ...................................... RGBHV, RGBS, RGsB, RsGsBs

Output type .................................... RGBHV, RGBS, RGsB, RsGsBs

Input level ...................................... Analog or TTL, 1.7 V to 5 Vp-p

Output level ................................... TTL: 0-5 Vp-p, unterminated

Input impedance ............................ 510 ohms (default) or 10k ohms, selectable

Output impedance ......................... 25 ohms (default) or 50 ohms, selectable

Max. propagation delay .................. 60 ns

Max. rise/fall time ........................... 4 ns

Polarity ............................................ Positive or negative (follows input)

General

Attached external power supply ..... 100 VAC to 240 VAC, 50/60 Hz, 4.5 watts,

external, autoswitchable; to 12 VDC, 1 A,

regulated

Power input requirements ............... 12 VDC, 0.2 A

Rack mount ..................................... No

Enclosure type ................................. Plastic

Enclosure dimensions ..................... 1.5" H x 5.0" W x 2.5" D

3.8 cm H x 12.7 cm W x 6.4 cm D

(Depth excludes connectors.)

Product weight ............................... 1.6 lbs (0.7 kg)

Shipping weight ............................. 3 lbs (2 kg)

Listings ............................................ UL, CUL

Compliances ................................... CE

MTBF .............................................. 30,000 hours

Warranty ........................................ 3 years parts and labor

NOTE: All nominal levels are at ±10%.

Model Version Description Part Number

P/2 DA2 PLUS 1x2 VGA-QXGA ...................................................... 60-046-03

1 2

Comentários a estes Manuais

Sem comentários

Extron electronics P/2 DA2 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio Extron electronics P/2 DA2