Extron-electronics CS 120P User Guide Manual do Utilizador descarregar pdf (Página 30)

7. Attach the speaker wire to the strain relief tie down point using the provided zip

tie.

Captive Screw

Connector

Strain Relief Tab

(zip tie)

Figure 40. Attaching the Speaker Wire to the Strain Relief Point

8. Mount the CS 26T (see figure 41).

a. Insert the CS 26T through the bottom of the hole in the ceiling tile that was cut in

step 2.

b. Tighten the four screws (clockwise) until the speaker is securely clamped to the

ceiling.

Figure 41. Mounting the Speaker to the CS 120P

ATTENTION: Do not overtighten the screws.

CS 26T and CS 120P User Guide • Installation 24

1 2 ... 25 26 27 28 29 30 31 32 33

Sem comentários

Extron-electronics CS 120P User Guide Manual do Utilizador Página 30