Extron-electronics PoleVault Systems PVS 305SA Manual do Utilizador

PoleVault® Systems(featuring the PVS 305SA)Installation Guide68-1691-01 Rev. A08 09ALSO AVAILABLE:The PoleVault® SystemInstallation Video.View it at

Introduction — Inventory Overview, cont’d1-8PoleVault Systems Installation • Introduction — Inventory Overview1-8b. Items not includedThe following i

1-9PoleVault Systems Installation • Introduction — Inventory Overview 1-9 d. Installation toolsTo aid the professional installer, this checklist give

PoleVault Systems Installation • Installation2-1Installation OverviewThis overview outlines the basic steps for installing the PoleVault System. Deta

PoleVault Systems Installation • Installation — Stage 12-2Stage One — Install the Screen and ProjectorStage 1 This stage involves installing the thre

PoleVault Systems Installation • Installation — Stage 12-3Installation — Stage One, cont’d1. Mark screen locationa. Mark the center line and the oute

2-4PoleVault Systems Installation • Installation — Stage 1 e. Using suitable screws, mount the projector onto the projector bracket, i.e., the lower

PoleVault Systems Installation • Installation — Stage 12-5Installation — Stage One, cont’d4. Cut the ceiling tilea. Mark the location of the PCM 340

2-6PoleVault Systems Installation • Installation — Stage 1 6. Finish Projector Drop Ceiling Mount installationa. Detach the projector bracket/project

PoleVault Systems Installation • Installation — Stage 12-7Installation — Stage One, cont’d8. Install the electrical box (if required)W All electrical

2-8Stage Two — Install the Wall Plates and MLC 104 IP PlusStage 2This stage involves installing the devices shown below.Audio and VideoOutput Port (at

This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipmen

PoleVault Systems Installation • Installation — Stage 22-9Installation — Stage Two, cont’d PVT transmitter installation • CAT 5 T568A signal transmi

2-10PoleVault Systems Installation • Installation — Stage 2 N The installation must conform to national and local building and electrical codes, an

PoleVault Systems Installation • Installation — Stage 22-11Installation — Stage Two, cont’d2. Pull the cables (at the input locations)The following c

2-12PoleVault Systems Installation • Installation — Stage 2 3. Install wall platesa. Connect the CAT 5 cables to the rear of the input devices (for R

PoleVault Systems Installation • Installation — Stage 22-13Installation — Stage Two, cont’d4. Install MediaLink ControllerT Before cabling and instal

2-14PoleVault Systems Installation • Installation — Stage 2 b. Connect the IR/RS-232 projector communication cable as shown for either RS-232 or IR p

PoleVault Systems Installation • Installation — Stage 22-15Installation — Stage Two, cont’dExtronMLC 104 IP PlusRotate locking armand insert into wall

2-16PoleVault Systems Installation • Installation — Stage 2Stage Three — Install the FF 120 Ceiling SpeakersStage 3This stage involves installing the

PoleVault Systems Installation • Installation — Stage 32-17Installation — Stage Three, cont’dN The installation must conform to national and local

2-18PoleVault Systems Installation • Installation — Stage 3 4c Wire the captive screw connector.PVS SwitcherRear PanelSpeaker 1 Speaker 2LR4/8OhmsAMPL

1-1PoleVault Systems Installation • IntroductionIntroductionOverviewThis guide covers the installation of the Extron PoleVault® System in a drop ceili

PoleVault Systems Installation • Installation — Stage 42-19Stage Four — Install the PMK 550 and the PVS 305SAStage 4This stage covers installing the d

2-20PoleVault Systems Installation • Installation — Stage 4 PVS 305SA and power supply on the PMK 550 base plate (inverted)2d Slide the base plate up

PoleVault Systems Installation • Installation — Stage 42-21Installation — Stage Four, cont’d2b Gather the cables, pass them down the pipe. PoleVault

2-22PoleVault Systems Installation • Installation — Stage 4 LRLRLRAUX AUDIOINPUT 5LINE OUTVOICELIFTRECEIVERPAGINGSENSORDO NOTGROUNDOR SHORTSPEAKEROUTP

PoleVault Systems Installation • Installation — Stage 42-23Installation — Stage Four, cont’db. Screw the UPB 25 adjuster plate back onto the base of

2-24PoleVault Systems Installation • Installation — Stage 5Stage Five — Congure the Switcher and the System1. Congure the switcher — MLS Switcher Co

PoleVault Systems Installation • Installation — Stage 52-25Installation — Stage Five, cont’d2. Congure the system — Global Configuratora. Download an

2-26PoleVault Systems Installation • Installation — Stage 5 3. Test the systema. Connect all the input devices (e.g., PC, DVD, document camera, etc

PoleVault Systems Installation • Installation — Stage 52-27Installation — Stage Five, cont’dd. Test the controller’s configuration with the following:

3-1PoleVault Systems Installation • Optional Accessory InstallationOptional Accessory Installation — VoiceLift SystemThe Extron VoiceLift system is an

PoleVault Systems Installation • Introduction1-2Introduction, cont'dPVS 305SAPOLEVAULT SWITCHERINPUT SELECTION12PEAKNORMALSIGNALCONFIG3 45AUX AUD

PoleVault Systems Installation • Optional Accessory Installation3-2Optional Accessory Installation — Priority Page Sensor KitThe Priority Page Sensor

3-3PoleVault Systems Installation • Optional Accessory Installation LRLRLRAUX AUDIOINPUT 5LINE OUTPAGINGSENSORDO NOTGROUNDOR SHORTSPEAKEROUTPUTSRS-232

4-1SpecicationsFor detailed specications and warranty information of the PoleVault System components, refer to the device manuals, or the product pa

4-2PoleVault Systems Installation • Reference Information Regulatory complianceSafety ... CE, c-UL, UL UL rated for u

PoleVault Systems Installation • Reference Information4-3Reference Information, cont’dPower Supply(included withPVS switcher)weight 0.9 lbs (0.4 kg)Ex

SIS Command/Response Table Command ASCII (Telnet) (host - switcher)Response(switcher to host)Video ConfigurationSet the video signal typeX!* X2# \ Typ

Extron USA - West Headquarters+800.633.9876Inside USA / Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+800.633.9876Inside USA / Canada

1-3PoleVault Systems Installation • Introduction — Planning Before you Begin Installation - PlanningBefore installation is started, several major fact

PoleVault Systems Installation • Introduction — Planning1-4Introduction — Planning, cont’d• Lighting  Type and control (important for projector ima

1-5PoleVault Systems Installation • Introduction — Planning c. Location of MediaLink® Controller and Wall Plates• Forward and side reach (for full d

PoleVault Systems Installation • Introduction — Inventory Overview1-6Introduction — Inventory OverviewUPB 25 White60-773-03UPB 25Universal Projector B

1-7PoleVault Systems Installation • Introduction — Inventory Overview PoleVault System42-108-03 (or 42-109-03*, or 42-110-03*)MLC 104 IP PlusMediaLink