Extron-electronics TLP 710CV User Guide Manual do Utilizador descarregar pdf (Página 33)

Updating Firmware From a Web Browser

1. Power on a computer that is connected to the same network as the TLP 710CV.

2. From the Extron website (www.extron.com), download the ﬁrmware for the touchpanel.

Click the Download tab on the Extron home page and select the Firmware option (see

ﬁgure 20).

3. Navigate to the touchpanel ﬁrmware and click Download.

4. This downloads the ﬁrmware to your computer. Note the folder in which the ﬁrmware ﬁle

is saved.

5. Open your browser and type the IP address of the TLP 710CV unit into the address box.

The browser opens the TouchLink touchpanel web pages (see page 23).

Figure 23. Firmware Upgrade Web Page

6. Click the Configuration tab at the top of the page and then select Firmware Upgrade

from the bar on the left.

7. Use the Browse button to navigate to the ﬁrmware ﬁle that was saved in step 4 and select

the appropriate ﬁrmware ﬁle.

8. Click Upload. The Touchpanel screen shows the message “Firmware Uploading... Please

Wait...”. When the rmware is uploaded, the screen shows the message “Restarting...”.

Once the ﬁrmware is installed, the touchpanel can be calibrated using the on-screen

menus (see page 18) or the TouchLink touchpanel web pages (see page 23).

TLP 710CV • Conguration Software 27

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Sem comentários

Extron-electronics TLP 710CV User Guide Manual do Utilizador Página 33