Extron electronics USB HUB4 AAP Instruções de Operação descarregar pdf (Página 14)

Installation, cont’d

USB HUB4 Series • Installation

2-

PRELIMINARY

Red

White

Green

Black

Shield

Type A connector

USB Type A-to-B (or mini B) cable with the Type B connector removed

3. Twist the exposed shield strands together.

4. Strip 1/8 inch (4.5 mm) of the insulation from the end of each colored wire of

the cable.

5. Connect the colored wires and the twisted shield to the HUB4 as described

below. Note that each pin of the connector is labeled above with the color

of the wire that should be connected to it (R, W, G, and B), based on the USB

standard for wiring color schemes.

V+/R — +5 VDC. Connect the red wire to this port.

D-/W — Data –. Connect the white wire to this port.

D+/G — Data +. Connect the green wire to this port.

/B — Ground. Connect the black wire to this port.

S — Shield. Connect the braided shield to this port.

6. Plug the Type A end of the USB cable into a USB port on your computer.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sem comentários

Extron electronics USB HUB4 AAP Instruções de Operação Página 14