Extron electronics Universal Interfaces RGB 134xi Manual do Utilizador descarregar pdf (Página 2)

FEATURES

The RGB 130xi, RGB 134xi, and RGB 150xi are universal analog comput-

er-video interfaces with 15-150 kHz scanning ranges and 300 MHz (-3dB)

of RGB bandwidth. All three are compatible with nearly every computer

and display signal, including VGA, SVGA, XGA, SXGA, Mac, SUN and

SGI, and output simultaneous composite and separate horizontal/vertical

sync. Sync on green is also available at the flip of a switch. Sync processing

is accomplished through Extron’s ADSP

™

Advanced Digital Sync

Processing technology. ADSP provides all-digital processing of sync signals,

eliminating incompatibility issues encountered when using analog sync pro-

cessing with digital display devices (DLP, LCD, Plasma, etc.).

In addition to these features, the RGB 134xi, which replaces Extron’s RGB

124, adds the convenience of two sets of six BNC outputs. This allows for

multiple displays without the need for a distribution amplifier. The RGB

150xi takes the functionality of RGB 130xi (which replaces Extron’s RGB

120p) and adds a 15-pin HD input and buffered local monitor output. The

latter allows for the connection of the computer’s local monitor without any

reduction of signal quality or integrity. All three incorporate active PC

audio interfacing, an internal power supply, and image centering features.

Optional, detachable mounting kits give the RGB 130xi, RGB 134xi, and

RGB 150xi remarkable flexibility. The under-desk mounting kit allows each

interface to be mounted under any flat surface, such as a desk, podium,

table, cabinet, wall, etc. Select the through-desk mounting kit so that inputs

and centering controls are easily accessed, while the power, balanced audio,

and video output cables are hidden away behind the surface being penetrated.

■ High performance compatibility – Provides a 15-150 kHz

horizontal frequency range and 300 MHz of RGB video

bandwidth.

■ Built-in Advanced Digital Sync Processing (ADSP

™

) – All

digital sync modification process insures flawless operation

with any LCD, DLP, plasma or other digital display device.

■ Two optional mounting kits – Allows for installation under

flat surfaces, as well as through them. Under-desk kit part

#70-077-01, through-desk kit part #70-077-02.

■ Image centering – Allows the input signal to be shifted on

the presentation device for a properly centered image.

■ Level/Peaking – Three level/peaking modes are available to

compensate for fuzzy images and streaking associated with

cable resistance and system bandwidth losses.

■ Balanced audio conversion – Unbalanced computer-gener-

ated audio is input via a 3.5 mm mini jack and output

buffered as balanced line-level audio

■ Simultaneous separate and composite sync output – Six BNC

connectors allow for composite and separate horizontal and

vertical sync without switches or other configuration. Sync

on green is also available.

■ Buffered MBC support – Nine volt power socket is avail-

able from the front panel of the RGB 130xi and RGB 134xi

for use with Extron buffered monitor breakout cables.

■ Termination – The RGB 130xi and RGB 134xi provide 75

ohm termination for use with laptops and non-terminated

monitor breakout cables. The RGB 150xi provides termina-

tion for pins 4 and 11 of its 15-pin HD input, insuring that

machines that require local monitors to operate will do so.

■ Durable, compact metal enclosure – Metal enclosure pro-

vides durability for use in rental, corporate, or any profes-

sional A/V application.

■ LED Indicators – A two color LED indicates power and

video signal detection, while a second red LED indicates

minimum/maximum image shift.

Video input

Number/type .................... 1 analog RGBHV, RGBS, RGsB,

RsGsBs

Connectors ...................... RGB 130xi, RGB 134xi :

1 9-pin D male, MBC/LBC cable

or buffer

RGB 150xi :1 15-pin HD male

Nominal level(s) .............. Analog – 0.3V to 1.5V p-p

Maximum level(s) ............ Analog – 1.5V p-p

Impedance........................ RGB 130xi, RGB 134xi : 75 ohms

or HI Z, switchable set to 75 ohms

if no local monitor connected),

RGB 150xi : 75 ohms

Horizontal Frequency .......... Autoscan 15 kHz to 150 kHz

Vertical frequency ............ Autoscan 30 Hz to 120 Hz

Return loss........................ -30dB @ 5 MHz

Maximum DC offset.......... 4.0V

Video throughput

Gain ................................ Unity (0.7V),

15% with 3dB peaking (0.8V)

30% with 6dB peaking (0.9V)

Bandwidth........................ 300 MHz (-3dB)

Video output

Number/type/format ........ 1 analog RGBHV, RGBS, RGsB

Connectors ...................... RGB 130xi : 6 BNC female

RGB

134xi : 2 x 6 BNC female

RGB 150xi : 6 BNC female,

1-15 pin HD buffered local moni-

tor output

Nominal level .................. 0.7Vp-p, 0.8Vp-p, 0.9V p-p

Impedance........................ 75 ohms

Return loss........................ -30dB @ 5 MHz

Sync

Input type ........................ RGBHV TTL (±), RGBS TTL (±),

RGsB 0.3V (-), RsGsBs 1.3V (-)

Output type...................... RGBHV (±), RGBS(±), RGsB (-)

Input level ........................ 2.0V to 5.5V p-p with ±0.3VDC

offset (max.)

Output level .................... 4.0V to 5.0V p-p

Input impedance .............. 10 kohms

Output impedance .......... 75 ohms

Max. propagation delay ........ 48 nS

Max. rise/fall time ............ 3.5 nS

Polarity ............................ RGBHV ............ when RGBHV is

input, polarity follows input; other-

wise negative

RGBS, RGsB .......... negative

Audio input

Number/type .................... 1 PC level stereo, unbalanced

Connectors ...................... 1 3.5 mm stereo jack, 2 channel;

tip (L), ring (R), sleeve (ground)

Impedance........................ 10 kohms, DC coupled

APPLICATIONS

SPECIFICATIONS (Cont.)

PECIFICATIONS

Minimum level ................ 100mV

Maximum level ................ +8.5dBu, (unbalanced) @ stated %THD+N

Audio throughput

Gain ................................ Unbalanced 0dB, balanced +6dB

Frequency response .......... ±0.05dB @ 20 Hz to 20 kHz

THD + Noise .................. 0.03% @1 kHz, 0.3% @ 20 kHz at

rated maximum output drive

S/N .................................. >90dB, output 14dBu, balanced

Stereo channel separation ........ >95dB @ 1 kHz to 20 kHz

Audio output

Number/type .................... 1 stereo (2 channel), balanced/unbalanced

Connectors ...................... 3.5 mm stereo captive screw terminal,

5 conductor, for left and right output

Impedance........................ 50 ohms, unbalanced, 100 ohms

balanced

Gain error ........................ ±0.1dB channel to channel

Drive (600 ohm) .............. > +14dBu, balanced at stated %THD+N

General

Power................................ 100VAC to 240VAC, 50/60 Hz,

15 Watts, internal, auto-switchable

MBC power jack .............. 9.0V DC, 150 mA

Temperature/humidity ........ Storage -40° to +158°F (-40° to +70°C) /

10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) /

10% to 90%, non-condensing

Rack mount...................... No

Enclosure type .................. Metal

Enclosure dimensions ........ RGB 130xi, RGB 150xi :

1.7" H x 6.35" W x 6.13" D,

4.3 cm H x 16.1 cm W x 15.6 cm D

RGB 134xi : 1.7" H x 9.5" W x 6.13" D,

4.3 cm H x 24.1 cm W x 15.6 cm D

Shipping weight .............. 6 lbs (2.7 kg)

Vibration .......................... NSTA 1A in carton

Approvals.......................... UL, CE, FCC Class A

MTBF .............................. 30,000 hours

Warranty .......................... 2 years parts and labor

Part Numbers

RGB 130xi ...................... 60-290-01

RGB 134xi ...................... 60-291-01

RGB 150xi ...................... 60-293-01

RGB 130xi

RGB 134xi

ITO

Thunder

™

Mounting Brackets

1 2 3 4

Comentários a estes Manuais

Sem comentários

Extron electronics Universal Interfaces RGB 134xi Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Extron electronics Universal Interfaces RGB 134xi