
Extron DXP 44/48/84/88 HDMI Series Digital Matrix Switchers • Specications 1
Specifications
DXP HDMI Series
NOTE: *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Video
Routing
DXP 44 HDMI .......................... 4 x 4 matrix
DXP 48 HDMI .......................... 4 x 8 matrix
DXP 84 HDMI .......................... 8 x 4 matrix
DXP 88 HDMI .......................... 8 x 8 matrix
Signal type ..................................... TMDS digital RGB and single-link DVI digital video signals are supported
Digital video ............................ RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component
video (HDMI), actively buffered (supports all single-link DVI and HDMI [if using
an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz
computer video and HDTV 480p, 720p, 1080i, 1080p)
NOTE: The DXP HDMI Series switchers support HDMI specification features including data rates up to 6.75 Gbps,
Deep Color up to 12-bit, 3D, and HD lossless audio formats.
Digital audio ............................ Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively
buffered.
Consumer Electronics Control (CEC)
Not supported
EDID and DDC ......................... Supports Extended Display Identification Data (EDID) and Display Data Channel
(DDC) data using DVI and HDMI standards. EDID and DDC signals are actively
buffered.
HDCP ...................................... Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and
HDMI standards
HPD ......................................... Supports hot plug detection (HPD) of display as a pass-through signal.
Gain ............................................... Unity
Resolution range ............................ Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single-link DVI
standard) @ 60 Hz
Maximum data rate ........................ 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ...................... 225 MHz
Standards ....................................... DVI 1.0, HDMI
Switching speed ............................. 200 ns, max.
Video input
Number/signal type ........................ 4 or 8 (depending on model) digital RGB (TMDS) HDMI (or single-link DVI-D*)
Connectors .................................... 4 or 8 female HDMI type A (digital only)
Nominal level
Digital video ............................ 1.2 Vp-p
DDC (Display Data Channel) .... 5.0 Vp-p (TTL)
Minimum/maximum level ............... 0.5 V to 1.0 Vp-p with no offset
Impedance ..................................... 100 ohms
Return loss ..................................... <-15 dB @ 1 MHz to 1.5 GHz
TDR rise time (10%-90%) .............. 75 ps
Equalization ................................... Automatic
For manuals, use the standard Section style instead
of Chapter title, specs sheet or Heading 1,
specs stand-alone; and use Heading 1 as usual for
“Specifications” if the specs are part of a multitopic chapter.
Click the text tool where you want to insert the specs table,
select the specs table container paragraph style, then
paste in the specs table from the stand-alone master specs
sheet.
For specifications from template v7.6 or earlier, use this guide
to which new paragraph style replaces which old style:
Specs8_Heading 2 replaces SpecsSubHdr
Specs8_L1 “ Specs7
Specs8_L1 cont’d “ Specs7A
Specs8_L2 “ Specs7 subcategory
Specs8_L3 “ Specs7 sub-subcategory
Specs8_Note “ SpecsNote7
Specs8_Warning/Caution “ Specs7Warning/caution
Specs8_ Revision code “ Revision code
The other new styles are required for proper table placement/
formatting (one for the entire specs table as placed within a
manual section [specs table conteiner], two others [Specs8_
Note L1 table and Specs8_Note L2 table] for the note/
caution cells within the specs table).
At this time, the notes, cautions, and warnings boxes/tables
within specs have to be hand inserted and merged and
formatted. Use the existing table styles (NOTE, Caution,
and Warning1) for the table boxes.
Apply Specs8_Note L1 table or Specs8_Note L2
table (depending on the content to which the note,
caution, or warning applies) to the nested note, caution,
or warning table. Also apply the cell style Specs8_Note
cell insets to the cell containing the note, caution, or
warning nested table.
Apply Specs8_Note or Specs8_Warning/Caution
to the text within the nested note, caution, or warning
table.
Apply the Specs8_note cell inset cell style to the
specs table cell containing the nested table.
NOTES:• Allnominallevelsareat±10%.ULratedforuseinplenumairspaces:meetsUL2043forheatandsmoke
release, excluding the power supply; meets UL 60950 for safety. UL rated for use in plenum airspaces:
meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety.
• Specifications are subject to change without notice. UL rated for use in plenum airspaces: meets UL 2043
for heat and smoke release, excluding the power supply; meets UL 60950 for safety.
• The 5-pole port supports both hardware and software flow control.
The 3-pole ports support software flow control.
Comentários a estes Manuais