Extron-electronics Cable Retraction System User Guide Manual do Utilizador Página 23

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 36
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 22
Cable Retraction System • Installation 17
Locking Screw (Optional)
If the retraction system is mounted next to an unused location in the Cable Cubby
enclosure, a locking screw is provided to prevent the retractors from rotating on their
mounting bolt during operation.
If needed, tighten the locking screws to prevent movement of the retractor. There is one
locking screw for each retractor.
NOTE: Do not overtighten. The locking screw only needs to be snug.
Tighten locking
scre
w (1 each).
Locking
Screw
Figure 18. Locking Screws
Vista de página 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comentários a estes Manuais

Sem comentários