Extron electronics MPX 423 A Instruções de Operação descarregar pdf (Página 24)

MPX 423 A • Operation

Operation, cont’d

Mode 3: Holding the Reset button until the I/O LED blinks once (3 seconds)

followed by a momentary (<1 second) press turns events either on or off,

depending on the current state of the events:

• If the events are currently stopped following the momentary (<1 second)

press, the I/O LED will flash twice indicating the starting of events.

• If events are currently running following the momentary (<1 second)

press, the I/O LED flashes three times, indicating the stopping of events.

Each flash lasts for .25 seconds. Nothing happens if the momentary press

does not occur within 1 second.

Mode 4: Holding the Reset button until the I/O LED

blinks twice (6 seconds)

followed by a momentary (<1 second) press will reset IP settings. The I/O

LED blinks four times in quick succession, confirming a Mode 4 reset. This

mode

1. Enables ARP program capability

2. Sets IP back to factory IP

3. Sets Subnet back to factory default

4. Sets Gateway back to factory default

5. Sets port mapping back to factory default

6. Turns DHCP off

7. Turns events off

Nothing happens if the momentary press does not occur within one second.

Mode 5: Holding the Reset button until the I/O LED

blinks three times

(9 seconds) followed by a momentary (<1 second) press causes a complete

system reset back to factory default conditions. Nothing happens if the

momentary press does not occur within 1 second. The I/O LED blinks four

times in quick succession, confirming a Mode 5 reset.

Factory reset modes

Factory resets can be set using the front panel I/O button. To reset the MPX 423 A

to factory defaults

1. Press and hold the I/O button on the front panel while plugging in AC power.

2. Continue to hold the I/O button until all LEDs on the front panel flash.

Once the I/O button is released, power-up continues and the LEDs go back to their

default configuration.

3-8

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Sem comentários

Extron electronics MPX 423 A Instruções de Operação Página 24