Extron-electronics PVS 405D User Guide Manual do Utilizador descarregar pdf (Página 45)

Assigning EDIDs

To assign EDID to selected inputs:

1. From the inputs screen (table of inputs) on the right, select the desired input or inputs

(see figure below).

2. From the table, select an available EDID (represented by a blue, green, or yellow

output display icon).

3. Click the Assign button to assign EDID to the selected input or inputs.

Figure 20. Assigning EDIDs

NOTE: If you do not select any inputs but still click

Assign, an error message is

displayed.

To assign EDID to all inputs:

1. From the EDID table, select an available EDID (represented by a blue, green, or yellow

output display icon).

2. Click the Assign All button.

NOTE: If you select Assign All, all input boxes, checked or unchecked, will be

ignored and the EDID will be assigned to all inputs.

PVS 405D • Using Extron Product Configuration Software 39

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Sem comentários

Extron-electronics PVS 405D User Guide Manual do Utilizador Página 45