Extron electronics MGP Pro Series Guia do Utilizador descarregar pdf (Página 60)

WindoWall Pro Series • HTML Configuration and Control 54

Using the Configuration Pages

There are three Configuration pages, which only administrators can access. When you

click the Configuration tab, these pages are listed on the sidebar menu at the left of the

screen. The following sections describe the changes you can make from these pages.

System Settings Page

On the System Settings page (figure 34), you can set IP parameters for the WindoWall Pro.

Figure 34. System Settings Page

To change your system settings:

1. On the Configuration tab, select System Settings from the sidebar menu at the left

edge of the screen.

2. Select or enter the new information in the desired fields.

3. When you have made all the desired inputs, click the Submit button at the bottom of

the panel. The new settings appear in the fields.

IP Settings fields

The IP Settings fields provide a location for viewing and editing settings unique to the

Ethernet interface. After editing any of the settings on this page, click the Submit button at

the bottom of the IP Settings panel.

Unit Name field

The Unit Name field contains the name of the WindoWall Pro. The name assigned at

the factory consists of the model name, followed by the last three character pairs of the

MAC address. You can change this name field to any valid name, up to 24 alphanumeric

characters.

NOTE: The following characters are invalid in the name:

+ ~ , @ = ` [ ] { } < > ' " ; : | \ and ?.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 89 90

Sem comentários

Extron electronics MGP Pro Series Guia do Utilizador Página 60