Extron-electronics SME 100 User Guide Manual do Utilizador Página 80

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 185
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 79
Backup / Restore Page
The File Management tab also contains a backup and restore page, accessed by clicking on
the Backup/Restore link on the left sidebar (see figure 68).
1
2
3
Backup
Restore
Backup All
IP Config
Box-specific
- Save IP configuration (ip.cfg) and box-specific parameters (box.cfg)
- Restore IP configuration
- Restore box-specific parameters
Backup files are stored in directory “/nortxe-backup”.
Backup / Restore
Backup/Restore
Figure 68. Backup / Restore Page
NOTE: FTP provides an alternative method to accessing and managing the backup files
of the SME100. See "Managing Files Using FTP" on page 73 for information.
The current configuration settings of connected devices can be saved and recalled using the
Backup / Restore page. The backup is saved as two files; IP config and box-specific. Both
files are saved when executing a Backup All, but each file must be restored individually. All
backups use the same filenames, so a current Backup All overwrites previous files.
The Backup / Restore page contains the following options:
a
(Backup) Backup All — Click this button to save all IP configuration and box specific
parameters from the connected SME100. A folder is automatically created on the File
Management page called nortxe-backup and contains the ip.cfg and box.cfg files.
These two files are used with the Restore IP Config (
b
) and
Restore Box-specific (
c
) buttons when restoring configuration settings.
b
(Restore) IP Config — Click this button to restore the IP configuration that was last
saved using the Backup All button above.
NOTE: If the SME100 was not backed up previously, or if there is not an ip.cfg
file stored in the nortxe-backup folder, the Restore IP Config button will not
be able to restore the IP configuration for the SME100.
c
(Restore) Box-specific — Click this button to restore the box specific parameters last
saved using the Backup All button above.
NOTE: If the SME100 was not backed up previously, or if there is not a box.cfg
file stored in the nortxe-backup folder, the Restore Box-specific button will
not be able to restore the box specific parameters for the SME100.
When the device is new or recently reset, there will be no backup files. A backup will need
to be completed before a restore can be accomplished. The following sections provide
procedures for using these buttons appropriately.
SME100 • Web-based User Interface Operation 74
Vista de página 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 184 185

Comentários a estes Manuais

Sem comentários